background image

PECO LIMITED WARRANTY FOR NEW PRODUCTS

A. WHAT IS UNDER WARRANTY?
 

PECO extends the following warranties to the original purchaser of each new PECO consumer product subject 

 

to the following limitations.

1. PRODUCT WARRANTY: 

Any part of any consumer product, which is defective in material or workmanship as

 

delivered to the purchaser will be repaired or replaced, as PECO elects, without charge for parts or labor, if the

 

defect appears within 12 months  from the date of delivery of the product to the original purchaser.

 ALL

 

DEFECTIVE PARTS MUST BE RETURNED TO PECO FOR INSPECTION TO

 

DETERMINE VALIDITY OF WARRANTY CLAIMS. 

Freight and mailing will be borne by the

 

customer.

2. PARTS REPLACED DURING WARRANTY: 

Any new PECO part which is furnished in performance of this

 

warranty and is defective in material or workmanship as delivered to the purchaser will be repaired or replaced,

 

as PECO elects, without charge if the defect appears within 90 days from the date of installation of such part or

 

before the expiration of the original warranty period, whichever is later.

B. SECURING WARRANTY ADJUSTMENTS.
 

Call PECO for Return Authorization. Damaged or broken parts other than engines or batteries, must be

 

returned to New PECO, Inc. 100 Airport Road, Arden, NC 28704 before any warranty adjustment can be 

 

authorized. At the time of requesting warranty adjustment, the purchaser must present evidence of the date of 

 

delivery of the product. The purchaser shall pay any charge for the product to and from Arden, NC.

C. ITEMS NOT COVERED BY PECO WARRANTY.
 

Engines and batteries attached to PECO products are covered under a separate  warranty by the respective

 

manufacturer.

D. UNAPPROVED ALTERATION OR MODIFICATION.
 

All obligations of New PECO, Inc. under this warranty shall be terminated if products are altered or modified in 

 

ways not approved by New PECO, Inc.

E. ACCIDENTS AND NORMAL MAINTENANCE.
 

The warranty covers only defective material and workmanship. It does not cover depreciation or damage

 

caused by normal wear, accident, improper use or abuse of products. The cost of normal maintenance and

 

normal replacement of service items such as belts, cutting blades, hoses, etc., which are not defective shall be

 

paid for by the purchaser.

F. NO REPRESENTATIONS ADDITIONAL WARRANTIES, DISCLAIMER.
 

Neither New PECO, Inc. nor any company affiliated with it makes any warranties, representations or promises 

 

as to the quality of performance of its products other than those set forth herein. Except as described above, 

 

New PECO, Inc. makes no other warranties 

AND SPECIFICALLY DISCLAIMS ANY AND ALL 

 

IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY.

G. ANY MACHINE USED FOR RENTAL PURPOSES ARE GUARANTEED FOR 45 DAYS FROM

 

DATE OF ORIGINAL SALE ONLY.

H. REMEDIED EXCLUSIVE.
 

The only remedies the purchaser has in connection with the breach or performance of any warranty on New 

 

PECO, Inc. consumer products are set forth above. In no event will PECO be liable for special incidental or

 

consequential damages.

1. NO SERVICE CENTER WARRANTY.
 

The selling Service Center makes no warranty on his own on any item warranted by New PECO, Inc. unless

 

he delivers to purchaser a separate written warranty certificate specifically warranting the item. The dealer has

 

no authority to make any representation or promise on behalf of PECO or to modify the terms of this warranty

 

in any way.

4

Summary of Contents for 37131504




























Reviews: