EDIT AUTO-TUNE
The Edit Auto-Tune
®
switch is used
to enter Auto-Tune editing mode.
When it is engaged (lit), the current
Auto-Tune preset will be displayed
on the LCD. When it is disengaged
(dark), the current EFX preset will
be displayed on the LCD.
MEDIA SELECT
This encoder is used to control
USB playback navigation. For
more information on this, see “USB
Playback.”
CH 9 INPUT SELECT (USB/BLUETOOTH)
This switch allows the user to
select the input signal being sent
to channel 9. It can select between
the USB A connector or a wireless
Bluetooth
®
connection from an
external device (Smart phone, iPod,
or tablet).
BLUETOOTH ACTIVE LED
The CH 9 INPUT button will
also function as the Bluetooth
Status LED. The blue backlit
switch indicates the status of the
Bluetooth connection. If the LED
is off, the Bluetooth module is
powered off and channel 9 is in
USB Playback Mode. If the LED
is slowly flashing, the
XR-
AT
is
not paired with any device, but is
available for connection. When the
LED is lit solid, the source device
is properly paired to the mixer and
ready to play.
BLUETOOTH OPERATION
To listen to music via the Bluetooth
wireless connection, you must first
pair (link) your
XR-
AT
mixer with
your Bluetooth phone and/or music
device.
Turn off any Bluetooth devices
previously paired with the XR-
AT
mixer.
Turn on the Bluetooth feature on
your phone or music device.
Make sure the XR-
AT
is ready for a
Bluetooth connection.
The Bluetooth Active LED should
be blinking and the LCD will say,
“Bluetooth Input.”
Place your phone or music device in
Bluetooth search mode. The phone
or music device will begin searching
for the XR-
AT
.
Select “Peavey Mixer” from the
search results on your phone or
music device.
You will be prompted to enter a pin
number. Enter the pin#, it is 7878 (or
“PVPV” on a phone number pad).
If the pairing is successful, the
Bluetooth Active LED will blink
rapidly 5 times and then remain lit.
You are now ready to begin
streaming through Bluetooth to the
mixer. The level can be adjusted
from the connected source or by
the level control in Channel 9.
The
XR-
AT
mixer will remember up
to 10 devices that it was previously
paired with and will automatically
connect to the last device with
which it was paired when turned
on. To clear the paired device
memory, make sure the mixer is
in Bluetooth mode and press and
hold the Ch 9 Input Select Button
(37) for 5 seconds. The
XR-
AT
mixer
will ask if you would like to clear
the Bluetooth memory. Select "Y"
using the Media Select knob to
clear the memory. The
XR-
AT
mixer
will go through the process of
clearing the memory, which should
take approximately 15 seconds.
Master Controls
35
36
37
comp
Auto-Tune
HIGH
MID
-M
ORP
H
LO
W
LO
W
MID
HIGH
LO
W
MID
HIGH
M
ONIT
OR
EFFECT
S
COMP
RESS
OR
CH. 1
LE
VEL
min
max
min
max
min
max
min
max
min
max
comp
Auto-Tune
CH. 2
min
max
min
max
min
max
min
max
min
max
high
min
max
clip
sig
clip
sig
comp
Auto-Tune
CH. 3
min
max
min
max
min
max
min
max
min
max
high
min
max
clip
sig
comp
CH. 4
min
max
min
max
min
max
min
max
min
max
high
min
max
clip
sig
comp
CH. 5
min
max
min
max
min
max
min
max
min
max
high
min
max
clip
sig
comp
CH. 6
min
max
min
max
min
max
min
max
min
max
high
min
max
clip
sig
comp
CH. 7
min
max
min
max
min
max
min
max
min
max
high
min
max
clip
sig
CH. 8
min
max
min
max
min
max
min
max
min
max
clip
sig
CH. 9
min
max
min
max
min
max
min
max
min
max
min
max
clip
sig
LEVEL
MAIN
min
max
+12
+6
0
-6
-12
63
125 250 500
1K
2K
4K
8K
12K
FLS FEEDBACK LOCATING SYSTEM
min
max
high
LEVEL
MONITOR
min
max
+12
+6
0
-6
-12
63
125 250 500
1K
2K
4K
8K
12K
FLS FEEDBACK LOCATING SYSTEM
SIGNAL
MON
MAIN
POWER AMP2 ASSIGN
EFX TO MON
Enable
KOSMOS-C
min
max
min
max
USB
MIC
LOW
HIGH
EFX
Edit
Auto-
Tune
Press to Select
Press to Select
efx clip
EFX / AUTO-TUNE
MEDIA SELECT
CH 9 INPUT
USB MEDIA PLAYBACK
DIGITAL EFFECTS
MUTE
DEFEAT
ANALOG
MEDIA
CHANNEL
DIGITAL
MEDIA
CHANNEL
USB MEDIA
-6
-12
LIMIT
-18
-24
-30
SIGNAL
-6
-12
LIMIT
-18
-24
-30
Aut
o-
Tune
Aut
o-
Tune
Aut
o-
Tune
18
18
19
19
35
34
30
36
28
27
26
31
32
33
25
29
37
23
22
20
24
21
