Inputs/Outputs
GLOBAL PHANTOM POWER
This switch, when depressed,
a48 VDC to all input XLR
connectors to power microphones
that need phantom power to work.
This switch a48
VDC voltage to the input
XLR connectors to power
microphones requiring phantom
power. If phantom power is
used, do not connect unbalanced
dynamic microphones or other
devices that cannot handle this
voltage to the XLR inputs.
RCA RECORD OUT
This pair of RCA jacks provides a
signal to the recording inputs of a
CD recorder, stereo tape deck or
other recording device.
NOTE: Do not connect a single
device to the Media Inputs (3) and
Record Outputs. This improper
setup forms a loop, which can
cause severe feedback.
MAIN OUT (TRS Balanced)
This 1/4" jack provides a signal
from the main mix (after the
graphic EQ) for an external power
amplifier. An external power
amplifier, such as our IPR
®
series
of amplifiers, can then drive
additional speakers.
MONITOR OUT (TRS Balanced)
This 1/4" jack provides a signal
from the monitor mix (after the
graphic EQ) for an external power
amplifier. An external power
amplifier, such as our IPR series
of amplifiers, can then drive
additional speakers.
SUB/MONO OUT (TRS Balanced)
This 1/4" jack provides a signal
that passes all signals under
150Hz. This can be used to drive
an external subwoofer amplifier or
a powered sub. The level of signal
tracks the main output.
POWER AMP INPUTS
These are 1/4" inputs that allow
an external line-level signal to be
connected to each of the built-in
power amps. Plugging an input into
these jacks breaks the signal from
the mixer to the built-in amplifier.
The mixer output is still available at
the Main out jack (40).
38
39
40
41
43
42
PAD
1
PAD
2
PAD
3
PAD
4
PAD
5
PAD
6
PAD
7
8
L
R
MEDIA
INPUTS
RCA
3.5mm
TRS
SUB OUT
TRS BAL
TRS BAL
MAIN OUT
TRS BAL
MONITOR OUT
NON-POWERED OUTPUTS
L
R
RECORD OUT
UNBAL
AMP 2
AMP 1
POWER AMP IN
ENABLE
ACTIVE
GLOBAL
PHANTOM
POWER
INPUT SELECT
MEDIA
XLR-1/4”
38
39
42
43
41
40
4
1
2
3
