26
4) If you are using Windows 95/98/2000/NT/XP click the mouse on MY computer ICON, then Floppy
Drive A icon.
When the menu is displayed click on SETUP.EXE.
5) Monitor Program will be installed and create a directory named “
Model No.
” automatically in Hard
Disk.
Communication with PC
1) Start the program by clicking the mouse on the icon.
2) Click on the
SetUp
button to open the setup dialog. Then select appropriate Serial Port and Baud
Rate and click on the
OK
button.
3) Click on the S TIME button and type in the appropriate sampling time.
4) Click the “START” button with mouse to start the program.
Start
: Starts the program.
Stop
: Stops the program.
3. GPIB (IEEE-488.2) Overview
Introduction
The instrument conforms to the Institute of Electrical and Electronics Engineers (IEEE) Standard 488.2-
1987. The specific implementation of IEEE-488.1 includes the following functions and subsets:
Interface Function
Subset
Source Handshake
SH1
Acceptor Handshake
AH1
Talker T6
Listener L4
Service Request
SR1
Remote Local
RL1
Parallel Poll
PP0
Device Clear
DC1
Device Trigger
DT1
Controller C0
Electrical Interface
E1
To facilitate programming, a brief overview of the IEEE-488.2 Standard (as it specifically applies to the
instrument) is provided.
4. GPIB Port
Standard IEEE-488.2 connector for connecting multiple devices to the GPIB interface.
* Note
The total cable length should be less than 25m (80ft) and the maximum number of device connections
(including controller) is 15.
