6
MENU Button
▼
SETUP F1
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ▶ ┐
EQUIP F2
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ▶ ┐
PAGE F1
F3
Ver No
SAVE
F2
LOCK F4
─ ─ ─ ─ ─ ─ ▶ ┐
S/N
LOAD F3
EXIT
F5
─ ┐
LOCKED
GPIB AD
NEXT
F4
EXIT
Cal.date
EXIT
F5
EXIT
F5
[Figure 2] Menu Layout
14) LCD
Displays the Waveform, Frequency, offset, Amplitude, (etc) settings and menus.
2. Rear Panel
WARNING
QUALIFIED PERSONEL.
TO PREVENT ELECTRIC SHOCK HAZARD AND FIRE,
REPLACE ONLY WITH FUSE OF SAME RATING AND TYPE.
DISCONNECT POWER SUPPLY BEFORE REPLACING FUSE.
DO NOT REMOVE COVER. REFER SERVICING TO
FUSE
85V ~ 270V 50/60Hz
250V T2AL
Made in Korea
AC IN
F
US
E
IEEE-488
RS-232C
S/N:
[Figure 3] Rear Panel
CAUTION
Before using, check that the AC line voltage is within
the specified line voltage range.
1) AC input
The AC line cord is inserted in to this connector. The allowable AC voltage range is 85 V to
270 V AC (
±
10%), 48 to 66 Hz.
2) Fuse Holder
Holds the 2 Amp 250 V - fuse.
CAUTION
Remove the AC line power when changing this fuse.
3) GND TERMINAL
Chassis ground terminal
