PCAN-Wireless Gateway – User Manual
63
Transferring data between 2 PCAN-Gateways always consists of a
Send and a Receive route. Note that both should use the same
transfer protocol (TCP or UDP) and the same port.
After saving, the route on Gateway 2 will be displayed on the
Routing > Manage Routes
page as follows.
A short time after both routes have been created and activated, the
connection will establish. You can interrupt the connection by
deactivating or erasing one of the routes on the
Routing > Manages
Routes
page.
Note:
The putting into operation of a PCAN-Wireless Gateway
is described in detail in chapter 3
.
Detailed information concerning the creation of routes, as well
as input and selection options, can be found in chapter 5.3.2
.
