15
Rev 1 or Rev 2 (round Gear Bar), without Tower:
4.
Follow Steps 3(a) and 3(b) above
a.
Retract the Pull Pins, completely remove, and
b.
drop the Risers into the well of the unit.
Skip to Step 7.
c.
No Rev units (oblong Gear Bar), with Tower
5.
Place the Gear Bar in position 3.
a.
Fold the Foot Bar down on to the Gear Bar and
b.
the Foot Bar Support Bar in the opposite direc-
tion so it also rests on the Gear Bar as shown
(same position as is used for stacking).
Follow Steps 3(c), (d) and (e).
c.
No Rev units (oblong Gear Bar), without Tower:
6.
Place the Gear Bar in position 3 (see 5(a)).
g.
Fold the Foot Bar down on to the Gear Bar and
h.
the Foot Bar Support Bar in the opposite direc-
tion so it also rests on the Gear Bar as shown
(same position as is used for stacking—see
5(b)).
Retract the Pull Pins, completely remove, and
i.
drop the Risers into the well of the unit (see
4b).
Skip to Step 7.
j.
STEP 4b
STEP 5a & b
Converting to Mat—with or without Tower (continued)
MVe_Tower_Owners_Manual-10_09.indd 15
12/4/09 4:21:32 PM
