Q
RIGHT & LEFT SPEAKER Outputs: Speaker binding post outputs that accept
banana connectors (insert into hole on back of the post), spade connectors
(loosen, position spade around post, tighten), pin connectors (loosen, insert pin
through hole on post, tighten) or bare wire connections (loosen, loop around post
or insert through hole on the post, tighten).
Note: To enable the rear panel IR input connector and disable the front panel IR
receiver, press the current input button 10 times in succession until the standby
LED blinks 3 times. To disable the rear panel IR input connector and enable the
front panel IR receiver, repeat the procedure above until the standby LED blinks
2 times.
BANANA
PLUG
5-WAY
BINDING
POST
SPADE
LUG
LOOPED
WIRE
STRAIGHT
WIRE
PIN
CONNECTOR
11
