Chapter 5
Functionally Testing the 6-Button Controller
After a device’s configuration is modified it should be tested to make sure it
operates as you expect. UPStart gives you an easy way to do this.
The Device Test Tab
The Edit Device Dialog has a special tab labeled Device Test that allows
you to run a functional test on the selected device.
The Device Test tab for a 6-Button Controller is shown below. From this
tab you can test that your 6-Button Controller’s LEDs properly turn on and
off upon command. You can also press the pushbuttons on your 6-Button
Controller and see any of its transmissions in the Reception Log to verify
that they are working as you expect.
The UPB 6-Button Controller User’s Guide
35
