Chapter 7 - Special Modes Of Operation
ON
A
B
C
D
OFF
Press and hold both the ON and OFF pushbuttons at the
same time.
Step 1
:
Hold
Note: All of the LED indicators will begin to
blink indicating its in Setup Mode.
Hold
To enter the 6-Button Controller into the Factory Default Mode simply
press and hold the 6-Button Controller’s ‘A’ and ‘D’ pushbuttons. The 6-
Button Controller will indicate that it is in Factory Default Mode by lighting
its ON and OFF indicators.
ON
A
B
C
D
OFF
Press and hold both the 'A' and 'D' pushbuttons at the same
time.
Step 2
:
Hold
Note: The ON and OFF indicators will light and all of the other
indicators will stop blinking indicating its in Factory Default Mode.
Hold
Note: the Factory Default Mode can only be entered from the Setup
Mode.
Exiting Factory Default Mode
The 6-Button Controller can be taken out of the Factory Default Mode in
the exact same manner it is taken out of Setup Mode (e.g. press and hold the
ON and OFF pushbuttons).
The UPB 6-Button Controller User’s Guide
41
