Chapter 3— Pushbutton Switches
Manually Unlinking A Wall Switch From A Controller Button
Each WS1D Wall Switch Dimmer comes pre-configured from the factory
“linked” to all of the pushbuttons of the 6-Button Controller (see “Default
Scene Lighting System”). Any link between a pushbutton and a Wall
Switch Dimmer can easily be removed by following the steps outlined
below.
Step 1
: Press the rocker switch of the Dimmer you want
removed 5 times quickly.
5
times
The load will flash and the LED will blink green quickly.
Note: The light of the newly removed Dimmer
will flash to indicate that it has been removed
from the Link.
10
times
Press the pushbutton that controls
the scene
10
times quickly.
Step 2
:
E
F
G
H
I
J
K
L
Manually Linking A Wall Switch To A Controller Button
New links can easily be added to your Wall Switch Dimmers by following
the steps outlined below.
Step 1
: Press the pushbutton that controls the
scene.
All of the lights in the scene will go to their
programmed levels.
E
F
G
H
I
J
K
L
Step 2
: Adjust the new light to the desired level for the scene.
Then press the rocker switch 5 times quickly.
5
times
The load will flash and the LED will blink green quickly.
Note: All of the lights in the scene including
the newly linked light will flash to indicate that
they have learned their new levels.
5
times
Press the pushbutton that controls
the scene 5 times quickly.
Step 3
:
E
F
G
H
I
J
K
L
The UPB 6-Button Controller User’s Guide
13
