Erwin XL building Instruction
September 2008
7. Installation of electronical components
First you have to glue the assembly board inside the
fuselage, as the radio board is fixed to the assembly board.
The assembly board also serves to fix the hook for the
winch start.
Knock the nut enclosed into the hole of the assembly board.
Mount the radio board to the assembly board with the short
screw enclosed.
Grind the joins and put epoxy-glue on them. Then push
both boards into the fuselage (radio board in front) as far as
they will go.
Suggestion for the installation on the radio board:
Mount everything on the board and then thread it inside the
fuselage.
www.pcm.at
8