Erwin XL building Instruction
September 2008
DATA
1. Kit – Contents
Fuselage, in two parts
Wing, in two parts
V-Tail
Steel-connector, 2 pieces
Carbon-connector, 2 pieces
Covers for servos on wing, 4 pieces
Covers for servos on v-tail, 2 pieces
Radio board (for receiver, accumulators and ballast)
Installation frame for Hitec HS-125 und HS-5125, 4 pieces
Assembly board
Levers for rudders, 6 pieces
Screws, 4 pieces, for fixing the wing
Screws, 2 pieces, for fixing the v-tail
Screw and nut for fixing the radio board
Building instruction
2. What else do you need:
Controls of the wing:
Connectors for push rods, M2,5mm, 8 pieces
Welding rod, d=2mm
Controls of v-tail:
Steel wire, d=1,5mm
Hook for winch start
On-off switch / socket for loading
Cables
Cable for antenna, possibly steel wire for extension of
antenna
Plugs
Epoxy-glue (for example UHU 300 endfest or Stabilit, no
fast hardening epoxy resin)
Cotton flocks to thicken glue
Tape
Hook for winch start
Connector for push rods, M2,5mm
3. Electronical equipment
Servos for the wing
Hitec
HS125
HS5125
Volz
Wing Maxx
Wing Star
www.pcm.at
3