PCM Erwin XL, Building Instruction, Page: 6 / 14

Erwin XL building Instruction September 2008
ASSEMBLING THE MODEL
5. V-tail
The v-tail is ready prepared with holes for screws to be
fixed on the fuselage.
Install the servos for the elevator in the v-tail.
You still have to make a hole for the cable in the v-tail and
in the fuselage.
For the connection to the control surfaces use the levers
enclosed and a steel wire. (Gluing of levers see page 10)
Fix the covers of the servos with a double-sided adhesive.
You still have to cut the cover where the lever of the servo
pushes through.
www.pcm.at
6