Manual
6
5 Operation
5.1 Selecting the measurement mode
Switch on the PCE-VM 40 by pressing the ON-OFF button. After the start screen, the measurement value
display with the most recently selected settings appears. Press F3 to open the main window and select
“measuring mode”.
You can choose between adjustable measured value (non-standard) and the three supported standards
which are described in the following sections. In the measurement value display you can view the
selected settings by pressing the F1 button.
Here you will see your chosen standard with its specified settings as well as the four frequency and
amplitude dots of the limit value curve.
Note: The following chapters include abstracts of the most relevant standards for building vibration. For a
compliant evaluation, it is necessary to study the standard documents to the full extent.
Summary of Contents for PCE-VM 40A
Page 31: ...Manual 31...
Page 32: ...Manual 32...
