Manual
17
5.8 Displaying saved data
After recording, you can view the
saved measurements in the “Recording” menu. Select the menu point
“View/edit/delete files” and then use the arrow keys ▲▼ to select the data file you wish to view.
A data file is displayed by its number and name, together with the start time, chosen standard and trigger
source. The following abbreviations are used:
Sust: sustained
Shrt: short
Ind: industrial
Res: residential
List: listed
Pipe: pipe
Foun: foundation
Ceil: ceiling
Steel: steel pipe
Conc: concrete (pipe)
Plas: plastics
Unreinf./resid.: unreinforced/residential
Reinforc./ind.: reinforced/industrial
Very low: very low sensitivity
Low sens.: low sensitivity
Normal: normal sensitivity
Higher: higher sensitivity
Occas.: occasionally
Freq.: frequently
Perm.: permanent
acc.: acceleration
vel.: velocity
Note: The file numbers are not always in the order of saving. A previously erased file number will be re-
assigned to the next saved file.
Pressing ◄ deletes the file together with all of its recorded measurements.
Press F1 to change the file name.
Press OK to open the file. The first saved record is then displayed. Below the file name, you see the
record number with the total number of records in the file, date and time and the trigger event. The
abbreviations mean:
(T): time interval controlled
0→W: normal to warning transition
0→A: normal to alarm transition
W→A: warning to alarm transition
W→0: warning to normal transition
A→W: alarm to warning transition
A→0: alarm to normal transition
Summary of Contents for PCE-VM 40A
Page 31: ...Manual 31...
Page 32: ...Manual 32...
