© PCE Instruments
Magnetic hook
Step 1: Turn the assembly ring down to the bottom.
Step 2: Screw the magnetic hook on until it snaps in.
Climbing ball
Step 1: Remove the assembly ring.
Step 2: Screw the climbing ball on until it snaps in.
Please note that the magnetic hook and the climbing ball can only be attached to
borescope cables with a diameter of 5.5 mm.
Operation
Boost key
Use this key in a dark environment. The red LED indicates that the Boost function has been
activated. The image will be lightened up.
Note: Hold the probe steady.
Before “boosting”
After “boosting”
