© PCE Instruments
Preparations
1. Insert the end of the borescope cable into the connection socket. Use the white dot on
the borescope cable for your orientation, to know which way round it has to be
inserted into the socket and tighten the sealing nut.
2. Turn on the borescope and place the camera head in the desired inspection area.
Operation
1. Using the rotary knob, you can control the wire-draw mechanism. This moves the
camera head. By turning the rotary knob clockwise the camera head will be bent to
the right side. Turning the rotary knob counter-clockwise will turn the camera head to
the left side.
ATTENTION:
Overwinding the rotary knob will damage the wire-draw
mechanism of the borescope cable.
