Manual
31
b) Start of the Storing Process
(1) In all ranges / modes except the Hz range, "SHIFT" appears at the bottom left on the screen
when you press SHIFT. Then press 9 REC to start the continuous data storing with the set
sample time.
(2) To interrupt the storing process, repeat step 1.
(3) In this mode, no data can be logged in another measuring range or mode. To store the data for
another measuring range, the existing data must be first downloaded or deleted.
7.4
Delete and Download Data
(1) Delete data: Turn off the device. Press 9 REC and POWER simultaneously, till the device has
beeped twice. After that, the memory is cleared.
(2) Download data: first, install the supplied software on your PC and download the data from the
PCE-789 (see the details in the software manual).
8
Remote Control via PC
1. The baud rate between PC and PCE-789 is 460800Bps.
2. The following table shows the PC-keys corresponding to the PCE-789.
9
Maintenance and Cleaning
9.1
Charging the battery pack
1. There is a rechargeable lithium battery pack in the PCE-789.
2. After turning the device on, you see the remaining battery charge displayed.
3. When the remaining battery charge is less than 10%, we recommend to charge the battery with
the supplied PSU (adapter).
4. To charge the battery, you should follow the following steps:
(1) Plug the adapter into the socket.
(2) Connect the adapter to the PCE-789
(3) Turn on the device PCE-789.
9.2
Cleaning
Clean the device with a damp cloth and possible gentle cleanser. Do not use any abrasives or solvents!
