Manual
30
7.2
Storing Single Value
a) Instructions for Data Logging
(1) The user can set the value for SAMPLE and FILE NAME only in V measuring range. These
settings are automatically for the other measurement ranges (mA, ...).
(2) Press SETUP to enter the setup menu.
(3) SAMPLE: Set the sample time for the data log to "0".
(4) FILENAME: data can be stored under different file names. Here, the Filename can be set. (See
ASCII codes)
b) Start of the Storing Process
(1) In all measuring ranges / modes except the Hz measuring range, "SHIFT" appears at the bottom
left on the display when you press SHIFT. Then press (REC 9) to save the single reading under
FILENAME.
(2) In all measuring ranges / modes the individual measurement values can be saved under the
same FILENAME
(3) To continue the data logging in each measuring range, the step 1 described above must be
repeated.
7.3
Ongoing Data Storage
a) Instructions for Data Logging
(1) The user can set the value for SAMPLE and FILE NAME only in V ranges. These settings are
automatically taken for the other measurement ranges (mA, ...)
(2) Press SETUP to enter the setup menu.
(3) SAMPLE: Set the sample time for data logging (between 1 ~ 255 sec.)
(4) FILE NAME: for the continuous data storage it is not possible to save the data under different file
names (FILE NAME) to save. In this mode no FILE NAME must be entered.
