Manual
4
Here you can see the stress curve when the hydraulic impactor passes the induction coil.
If the hardness of a material is measured with the conventional statistically method, the measured value
is influenced by the pressure applied (720 HLD
≠ 720 HLC). Different hydraulic impactors will lead to
different exchange tables, you should always refer to the hydraulic impactor used.
2
Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
-
The device may only be used in approved temperature range
-
The opening of the case should only be done by qualified personnel of the PCE Instruments.
-
You should not make technical changes on the device
-
The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner
-
Always store the device in a cool, dry place.
This user's handbook is published from PCE Instruments without any guarantee.
We expressly point to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
