Manual
10
6.4.4
Mean time
After you got to the point “AVER”, press C until the desired mean time (0, 3, 4, 5) is reached. By choosing
0 no mean time is set.
6.4.5
Storage
After you got to the point “SAVE”, press C once or twice, depending on if you want switch on or switch off
the storage function. It is made possible to save 99 values which can be read out at a later point of time. If
the storage function is enabled in the bottom-left
corner of the LCD “-00” is displayed. All measured data
is stored automatically.
6.4.6
Read out / delete stored data
After you got to the point “MEMR”, press C to enter the read-out-mode. Press “M” and “C” simultaneously
to view the measured values. If there are no measurement values the LCD will show “NOD”. “M” and “C”
serve to scroll through the stored data. HOLD “M” and “C” simultaneously for about 5 seconds to exit the
read-out mode and delete the measured data.
6.4.7
Check out the serial number
After you got to the point “SN”, press C to view the serial number. It will be displayed. Press “M” again to
get to the next point of the menu.