Manual
9
6.3
Switch on
Press the release button on top of the device and it will switch to measuring mode.
6.4
Menu
Press the “M”—button and hold it. Eventually the word “MENU” blinks. This is how you get to the point
where the direction of impact can be set (“DIRE”). Keep pressing “M” until you get to the point where you
can set the material attributes (“MATE”), hardness scale (“CONV”) and the mean time (“AVER”). In the
end you return to the normal measurement mode.
6.4.1
Direction of impact
When “M”-button has been pressed and you got the point “DIRE”, you will have to press “C” in order to
adjust the direction of impact.
6.4.2
Material settings
After reaching the “MATE”-section “C” needs to be pressed until your preferred material is chosen (M1 …
M9)
M1: Steel / cast steel
M2: Cold work steel
M3: Stainless steel
M4: Grey cast iron
M5: Spheroidal graphite iron
M6: Aluminium cast
M7: Brass
M8: Bronze
M9: Copper alloy
6.4.3
Hardness scale
After you got to the point “CONV”, press C until the needed hardness scale (HLD, HRC, HRB, HB, HV,
HS, HRA,
σb) has been selected.
