Address:East Room 306,3th Floor,1st Building,Shenhua Industrial Park,Meihua Road, Futian District,Shenzhen City
Tel:0755-32978297
Email:[email protected]
Manual
8. Further specifications
You can access the menu for all settings on the device by pressing the “SET” button for more than 2
seconds, whilst the Data logger function of the device is
switched off
. By pressing the “NEXT”
button you can then scroll through the various options. These are:
dAtE
...
Date- / time- settings (year / month / day, hour / minute / second)
LooP
…
Set period of time for recording
dEC
…
Set format of decimal point (point or comma)
PoFF
…
Set or offset Auto-Power-OFF function
bEEP
…
Set beeper (ON/OFF)
t-CF
…
Select temperature unit °C or F
SP-t
…
Set recording interval (hour / minute / second)
Sd F
…
Format SD memory card
8.1
Set time
1. Confirm the option by pressing the “Enter” button while the display indicates “dAtE”. Now you
can set the value by pressing the ▲-button or the ▼- button (setting starts with year). As
soon as you have set the relevant value, you can skip to the next one by pressing the “Enter”
button. The order in which you can set the time and date is: year, month, day, hour, minute,
second.
2.
As soon as all values are set, you will get to the next option, which is setting the period of
time for recording, by pressing the “Enter”- button. Now all set values are saved.
8.2
Set period of time for recording
The recording period can be set for each day separately.
Example: If the device should record the values each day from 2:00 to 8:15 pm.
1. As soon as the display indicates “LooP”, confirm by pressing the “Enter” button. Now you can
set the relevant value via the ▲- and ▼- button (starts with setting the hour). As soon as the
relevant value is set, you can skip to the next one by pressing the “Enter” button. The order is
in which you can set the values is: hour / starting, minute / starting, hour / ending, minute /
ending.
2. If you press the “Enter” button after skipping through every value, the display will indicate
“StAr LooP no”.
3. Use the ▼-and ▲- button to choose between “yes” and “no”:
“yes” means the data will be recorded during the set period.
“no” means the data recording will be deactivated during the set period.
4. After selecting between “yes” and “no”, press the “Enter” button to confirm your selection.
Now all settings will be saved.
5. Start the function:
a. Chose at point 4 “yes”.
b. press now the “REC”-button. Now the “REC” symbol will appear on the display.
c. The device will now be ready to perform the recording during the set period.
6. Pause recording by:
After setting the recording function and period, press the “Logger” button. Now the recording
will be stopped and the “REC” symbol on the display will stop blinking.
7. Stop recording by:
After pausing the recording, press the “REC” button for about 2 seconds. The “REC” symbol
will then disappear from the display and the recording will be stopped.
9
