Address:East Room 306,3th Floor,1st Building,Shenhua Industrial Park,Meihua Road, Futian District,Shenzhen City
Tel:0755-32978297
Email:[email protected]
Manual
6.5
Data information
During the standard measurement mode (without data logger function) you can check the recording
interval via the “sampling check” button. The display will then show the set recording interval at the
bottom.
6.6
SD memory card
a. If you insert the SD memory card into the device for the first time, the device will generate
automatically a folder on the memory card:
TMB01
b. If you start the data logger function for the first time, the device will automatically generate a
file with the name
TMB01001.xls
under folder
TMB01\
. The data will then be written into that
file. As soon as there have been 30,000 data sets written into that file, a new file will be
generated. This file will be named
TMB01002.xls
then.
c. As soon as the folder
TMB01
contains 99 files, the device will automatically generate a new
folder named
TMB02\
.
d. Thus the data will be saved in the following order:
TMB01\
TMB1001.xls
…
TMB1099.xls
TMB02\
TMB02001.xls
…
TMB02099.xls
TMBXX\
…
Note:
The maximum value of XX is 10.
7. Transfer of data to a computer
a. Please remove the SD card from the card holder of the device, after the data was saved on
the memory SD card.
b. Put memory SD card into the reader at your computer (if there is one). You can also put the
card into the SD card adapter (included in delivery). That adapter supports a USB connection
to your computer.
c. Start the computer and the Windows Excel program. Now you can open the files from your
memory SD card. Any further processing of the collected data can be then performed via
Excel (e.g. generating a graphic).
8
