MULTICHANNEL SIGNAL CONDITIONER MODEL 482C27 GENERAL OPERATION MANUAL
18
Display Opts
Gain
Following is what the screen will look like if the display was set to show ‘Gain’ and channel 1 has a gain of 2000 and is
in full bridge mode with the input filter ‘On’ with no output filter option installed. Similarly, channel 2 has a gain of 10
and is in ICP® mode; channel 3 has a gain of 20 and is in ½ bridge mode and channel 4 has a gain of 100 and is in
voltage mode.
B*- I*- b*- V*-
2.0k 010 020 0.1k
The ‘Bias” display option is the same as the gain option except the channels bias reading replaces the gain setting. The
bias reading will be refreshed periodically.
Following is what the screen will look like if the display was set to show ‘Bias.’
B*- B*- I*- I*-
B15 B15 B23 B23
The ‘Output” display option is the same as the bias option except the channels output is digitized and displayed. As with
the bias reading it will be refreshed periodically.
Following is what the screen will look like if the display was set to show ‘Output.’
B*- B*- B*- I*-
+0.0 -9.9 +5.0 +1.0
.
NOTE:
Due to the limited screen size values less than or equal to -9.9 are displayed as -9.9 and values greater than or
equal 9.9 are displayed as 9.9.
20) Save current settings (Savs on front panel):
Save the current settings as the default settings the next time the conditioner is powered on.
Ver?
Unit
Reset
Disp
Savs
GType
