MULTICHANNEL SIGNAL CONDITIONER MODEL 482C27 GENERAL OPERATION MANUAL
10
2) Sensor Input Mode (INPT on front panel):
See section 1-4.2b.
3) Input Filter (FLTi on front panel):
A screen stating ‘This Option is Not Installed’ will appear. The 482C27 does not come standard with an input filter, but
the option is available. Contact the factory for more information.
Each channel’s input filter setting can be set independently of the other channels. To change the input filter setting from
the main menu, use the left / right
arrow keys until the cursor is over the FLTi option, and then press the Enter
button.
GAIN
SENS
INPT
FSOT
FSIN
FLTi
The following submenu will appear. Choose the channel you wish to change by using the up
and down
arrow keys.
Next, use the left / right
arrow key to move the flashing cursor over to the INP filter column. To change the filter
setting, use either the up
or down
arrow key to select either ‘On’ or ‘Off’, once you have the desired setting selected
hit ENTER to apply it.
Chan
INP Filter
2
Off
4) Output Filter (FLTo on front panel):
A screen stating ‘This Option is Not Installed’ will appear. The 482C27 does not come standard with an output filter, but
the option is available. Contact the factory for more information.
Each channel’s output filter setting can also be set independently of the other channels. To change the output filter
setting from the main menu, use the left / right
arrow keys until the cursor is over the FLTo option, and then press
the Enter button.
EXCi
EXCv
FLTo
ACDC ZERO ARNG
The following submenu will appear. Choose the channel you wish to change by using the up
and down
arrow keys.
Next, use the left / right
arrow key to move the flashing cursor over to the Out Filter column. To change the filter
setting, use either the up
or down
arrow key to select either ‘On-nn.nk’ or ‘Off’, once you have the desired setting
selected hit ENTER to apply it.
NOTE:
The ON setting also indicates the filter corner frequency, in kHz, implemented by the filter for the channel.
