DMM-2410D
Quad Channels Receiver and Processor
10
Pro Broadband Inc.
Uni/Multi UDP Port
set the destination port number, valid range
from 1024~65531
ProMPEG FEC
Enable/Disable
Column FEC UDP
Port
Port
Row FEC UDP Port Port
ProMEG FEC Mode
1D,5x5/1D,5x20/1D,10x10/2D,5x5/2D,5x20/2
D,10x10
FEC Aligment
Annex A/Annex B
Test Drop Packets
Gigabit Input
Only mode
Full
Duplex
Uni/Multicast
select Unicast or Multicast
Source Identify
on/off
Source IP Address Setting IP address
Multicast Address
Setting Multicast Address
Uni/Multi UDP Port
set the target port number of the uni/multicast
IP input, valid range from 1~65535
FEC Column UDP
Port
Port
FEC Row UDP Port Port
TS Clock Recovery
Auto: it is suggested to set Auto when there is
accurate PCR carried by the inputted TS/IP
Fixed Rate: when fixed rate is selected, user
has to configure a bit rate to regenerate the
TS clock. The configured fixed bit rate has to
be a little bit higher than the bit rate of the
inputted TS/IP.
Gigabit Local
Gigabit Address
set the IP address of the IP port
Gigabit Subnet Mask set the net mask of the IP port
Gigabit MAC
Address
display the MAC address of the IP port
Gigabit Gateway
set the gateway of the IP port
Gateway MAC
Address
set the MAC address of the gateway under
which the unit is connected
ASI Output
ASI-1/2/3/4
Output
ASI Output