DMM-2410D
Quad Channels Receiver and Processor
8
Pro Broadband Inc.
7.1 Overview of the Menu
Users are advised to restore factory setting of the machine before the first time using it. Because of
machine's too many functions, users are advised not to change those temporarily useless parameters in
order to avoid unnecessary fault.
After power on, the Local IP address will be shown on the LCD of DMM-1000CU. User can press ENTER
key to get into the main menu.
Status: show the status of the device.
Configuration: Configure remux and TS/IP parameters.
System: Configure the local settings of the device.
7.2 Description of menu
7.2.1 Status
Main-Menu Sub-Menu1
Sub-Menu2
Sub-Menu3
Description
Status
Tuner Status RSSI->Tuner 1/2/3/4
Strength Display
t
uner input signal Strength
C/N
Display t
uner input signal C/N
Eb-No Display
t
uner input signal Eb_No
BER Display
t
uner input signal BER
Input Bit Rate
T1/2/3/4
Display tuner 1/2/3/4 input Bit rate
IP
Display TS IP input Bit rate
Output Bit Rate A1/2/3/4
Display ASI-1/2/3/4 total and valid bit
rate
TS/IP Status
Link Status
Display IP link status:
10M/100M/1000M/Disconnect
Gigabit Output Status
Display IP out status
Gigabit In Status
Display IP in status