User Manual
V1.3 - 202301
Page 22 of 43
9.2.2
EVA mounting option 1: studs in machine
If the vending machine has pre-installed studs (see Figure 6):
1.
Position the mounting frame at the rear of the opening.
2.
Secure the terminal and frame with the four M4 nuts supplied with the terminal.
For a clean and neat finish of the front, do not forget to place the cover plate at the
front of the machine. The cover plate is secured with double-sided adhesive tape for
a strong connection.
Figure 7: Section view of mounted Apollo terminal (left) and ApolloMax terminal (right)
Figure 8: ISO view mounting option 1
Mounting
frame
Machine
Terminal
Cover plate
Rubber gasket
