User Manual
V1.3 - 202301
Page 41 of 43
18.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC ID: 2AHPPAPX01
- Terminal
Contains:
FCC ID: VPYLB1DX
- WiFi, Bluetooth Module
Contains optionally:
FCC ID: N7NRC76B
- LTE/GNSS modem
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Caution
Changes or modifications made to this equipment not expressly approved by Payter BV
may void
the FCC authorization to operate this equipment.
This device does not contain any user serviceable parts, under no condition are modifications to this
device allowed.
External Antenna
External modem antennas should always be installed at least 20cm away from human
body parts.
Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Electronic Label
The electronic label is accessible from the main screen by tapping the screen
at the top 5 times within 15 seconds.
