User Manual
V1.3 - 202301
Page 30 of 43
11.3.2
Firmware
This document applies to any firmware version as per below.
Location of Identifiers
The hardware and firmware identifiers are presented during the boot process.
The hardware identifier is also printed on a label on the back of the device.
The identification label shall not be torn off or altered in any way.
Installation and User Guidance
11.5.1
Initial Inspection
When the merchant first receives the Apollo terminal, they must check for signs of tampering. This
is described in the documentation for the Apollo terminal. It is strongly advised to carry out the
same checks when the terminal is in use.
The merchant should inspect the Apollo terminal to ensure that:
•
There is no sign of unusual cables connected anywhere on the device.
•
Where applicable, the device is still firmly secured in its intended installation location.
•
The device is not showing any warning / error messages.
•
There is no visible damage to the device.
•
The device serial number matches the inventory.
11.5.2
Installation
Installation instructions including the following information are provided in digital format [5].
•
Equipment checklist
•
Power cable connection information
•
Main characteristics of the terminal
