Paxar Monarch DOS-based PATHFINDER Ultra System 6035 Reference Manual Download

Page: 95 / 148

573

Price field length is invalid. The price field length in the
batch does not fit the format or the field contains blanks.

574

No CD scheme or room for CD. The CD scheme in the
batch does not fit the format or the field contains blanks.

575

The graphic included in your format could not be found.

580

Out of memory. Try to reallocate memory. Resend the
packet. If the error persists, call Technical Support.

603

Internal software error caused by the batch not being
held. Turn off the printer. Wait two seconds and turn it
back on. If the error persists, call Technical Support.

611

Font, bar code or density is invalid. The font, bar code
or density in the batch does not fit the format.

612

The data in this line of the batch is either missing or
does not match the format.

613

Reference point off tag.

614

Portion of field off tag. There may be an invalid
character in the packet. Make sure you did not enter

for

615

Bar code width is greater than 16 inches or the number
of keywords for your PDF 417 bar code exceeds

928

Decrease the density or shorten the amount of data to
print the bar code.

616

Dot shifting failed. A bad dot falls on a bar code that
cannot be shifted. Call Technical Support.

618

Magnification must be

Troubleshooting

7-13

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035




















































































































































Search results

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035

Reviews:

Related manuals for Monarch DOS-based PATHFINDER Ultra System 6035

Brands by name

Popular brands

Paxar Monarch DOS-based PATHFINDER Ultra System 6035, Reference Manual

Search results

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035

Reviews:

Related manuals for Monarch DOS-based PATHFINDER Ultra System 6035

Brands by name

Popular brands