Paxar Monarch DOS-based PATHFINDER Ultra System 6035 Reference Manual Download

Page: 80 / 148

G3. row

Distance between the bottom of the print area on the supply to
the bottom of the graphic image. Measured in selected units.

English

0 - 365

Metric

0 - 927

Dot

0 - 701

The row specified in the constant text, bitmap, line, or box
field is added to the row value above to determine the actual
position in the format.

G4. column

Distance between the left edge of the print area on the supply
and the left edge of the graphic. Measured in selected units.

English

0 - 183

Metric

0 - 465

Dot

0 - 352

The column specified in the constant text, bitmap, line, or box
field is added to the col value above to determine the actual
position in the format.

G5. mode

Imaging mode. Enter 0.

G6. rotation

The orientation of the graphic on the supply. Enter 0.

Example

G,57,0,0,0,0

Defines a graphic field that is identified by the number 57. The
image begins at 0,0. The imaging mode is 0 and there is no
rotation.

6-20

Creating Graphics

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035




















































































































































Search results

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035

Reviews:

Related manuals for Monarch DOS-based PATHFINDER Ultra System 6035

Brands by name

Popular brands

Paxar Monarch DOS-based PATHFINDER Ultra System 6035, Reference Manual

Search results

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035

Reviews:

Related manuals for Monarch DOS-based PATHFINDER Ultra System 6035

Brands by name

Popular brands