Paxar Monarch DOS-based PATHFINDER Ultra System 6035 Reference Manual Download

Page: 96 / 148

M a c h i n e F a u l t s

Errors 700 to 799 occur when there is a problem with the printer.

703

The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.

704

Printer has not sensed a supply mark within the
specified number of inches or out of supplies.
Check the supply tracking

✦

supply marks

✦

black mark sensor position

✦

supply roll for binding.

If the error continues to appear, change the supply.

730

A memory allocation error occured during initialization.

750

Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.

751

Printer did not sense a black mark when expected. The
supply may be jammed.

For errors 751-753, Check the

✦

supply tracking

✦

supply marks

✦

black mark sensor position

✦

supply roll for binding.

If the error continues to appear, change the supply.

752

Printer sensed a mark in the wrong place.

753

Printer sensed a mark that is too long.

7-14

Troubleshooting

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035




















































































































































Search results

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035

Reviews:

Related manuals for Monarch DOS-based PATHFINDER Ultra System 6035

Brands by name

Popular brands

Paxar Monarch DOS-based PATHFINDER Ultra System 6035, Reference Manual

Search results

Summary of Contents for Monarch DOS-based PATHFINDER Ultra System 6035

Reviews:

Related manuals for Monarch DOS-based PATHFINDER Ultra System 6035

Brands by name

Popular brands