Paxar Monarch 9412, Reference Manual

Page: 27 / 184

You can modify formats and fields with the optional entry method.
See "Optional Entry Method" in Chapter 6 for more information.
U s i n g O n l i n e C o n f i g u r a t i o n P a c k e t s
Use online configuration packets to change the printer settings.
You can send an individual packet or a packet that contains all
seven online configuration packets. You can supply all
parameters for each packet. Leave the parameters blank that you
do not need to change. For example,
{
I
,A,,,,1
p
} prints a slashed zero and uses the last sent online
System Setup parameters.
Make a copy of the online configuration worksheet in Appendix D,
"Format Design Tools," and save the original. Packets A-M are
listed on the worksheet.
When you turn off the printer, all the information in the online
configuration packets is saved and used when the printer is
turned back on. After you change printer configurations, you
must resend the format or batch to the printer before the changes
take effect.
C o n f i g u r a t i o n P a c k e t H e a d e r
Always include an I , immediately after the left bracket { and
before the packet identifier (A, B, C, etc.). The
I
parameter
identifies the data stream as a configuration packet.
Include the I parameter with each packet if
you are sending them individually. Include it
only at the beginning of a data stream if you
are sending multiple packets.
Configuring the Printer 3-5