Pavone Systems MCT 1302 Technical Manual Download Page 18 | Manualshive

Page: 18 / 84

Pavone Systems MCT 1302 Technical Manual Download Page 18

149

94

MCT 1302

MCT 1302 - DOSAGGIO

PW1507 Rev. 0.9

Page 16

FRONT PANEL OF THE INSTRUMENT

The MCT 1302 is a touch screen instrument dedicated to batching applications.
The main operating characteristics are:
• Programmable recipes, standard - 100 recipes of 20 steps. With Alibi memory option - 1000

recipes with 20 steps.

• 50 programmable activities.
• Management of 38 configurable outputs (6 internal outputs to the instrument plus 8 outputs for each

connected I/O module; maximum 4 modules that can be connected to the instrument). Depending

on the type of activity, up to 2 outputs can be selected.

•  Coarse and Fine batching control, tolerance control of the dosed weight and lack of product.
•  Automatic repetition of the batching cycles.
•  Management of the batched totals by activity and recipe.
The setup parameters are easily accessible and modifiable through the use of the function keys that

from time to time appear on the display used to select, edit, confirm and save the new settings.

DISPLAY

In the operating mode the display shows all the information necessary for a complete control of the

system. According to the various programming procedures, the display is used for programming the

parameters to be entered in the memory, i.e. messages indicating the type of operation being carried

out and therefore helping the operator in the management and programming of the instrument.

POWER UP OF THE INSTRUMENT

When switched on, the display temporarily shows an introductory mask, which shows the firmware

code and the version number. After a few seconds, the main screen is displayed, from which all the

instrument operations can be accessed.

«
...
16
17
18
19
20
...
»

Summary of Contents for MCT 1302





















































































Reviews:

No comments