manualshive.com logo in svg

Pavone Sistemi JBX8 LCD, Technical Manual

Share
Download
Pavone Sistemi JBX8 LCD Technical Manual Download Page 27

DATE CLOCK ADJUSTMENT

 

Access to this menu is only permitted in the case of hardware with a date clock.

SOTTOMENU CLOCK:

Message

Name

Description

Type Default

Range

Ind.Fieldbus

DATE

Date 

adjustment

Date adjustment function.

Spc

TIME

Time 

adjustment

Time adjustment function

Spc

ACCESS DISPLAY

 

This menu is only displayed in the case of METRIC operation.

SOTTOMENU ACCESSI:

Message

Name

Description

Type Default

Range

Ind.Fieldbus

ACC-01

Access 01

Procedure for displaying the 

last access of authorized 

personnel. 

Spc

ACC-02

Access 02

Procedure for displaying the 

penultimate access of authorized 

personnel. 

Spc

ACC-03

Access 03

Procedure for displaying the 

third last access of authorized 

personnel. 

Spc

ACC-04

Access 04

Procedure for displaying 

the fourth last access of 

authorized personnel. 

Spc

ACC-05

Access 05

Procedure for displaying the 

fifth last access of authorized 

personnel. 

Spc

The display shows the identification code used for the access (password table) and the progressive number 

of the access; in case the access is made through the calibration jumper, the identification code 0000 is 

displayed. Press the PRG key to continue displaying the progressive access number.

Summary of Contents for JBX8 LCD






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands