• DO NOT REPAIR, TAMPER WITH, OR TRY TO
RECONSTRUCT the dryer or electric shock, personal injury,
property damage, malfunction, or accidents may result.
• When inserting or pulling out the plug, hold the plug firmly
to prevent the cord from peeling and to prevent accidents,
misuse, personal injury, property damage, or malfunction.
• Stop using immediately if you smell an offensive odor. If
ignored, it could cause a fire or other accidents.
• Do not keep the dryer in a damp place, such as a bathroom,
or it may malfuntion.
• Stop using the dryer and remove from the power source
when there is an earthquake or thunder.
• Unplug the dryer from the power source when cleaning or
wiping to prevent fire or electric shock.
• Never block the air openings of the dryer or place it on
a soft surface, such as a bed or couch, where the air
openings may be blocked.
• Keep the air openings free of lint, hair, etc.
• Never use while sleeping.
• Never drop or insert any object into any opening or hose.
• Do not use an extension cord with this appliance.
• Avoid multiple cables to a plug.
SAVE THESE INSTRUCTIONS
• Do not direct hot air toward eyes or other heat sensitive areas.
• Attachments may be hot during use. Allow them to cool
before handling.
• Do not place the dryer on any surface while it is operating.
• While using the appliance, keep your hair away from the
air inlets.
• Do not operate with a voltage converter.
THE ALCI PLUG
This appliance is equipped with ALCI (appliance leakage current
interrupter) safety device specifically engineered for safety. ALCI plug
is intended to interrupt its load circuit when there is an electrical fault
to the appliance. It is for household use and may be plugged into a
standard AC electrical outlet (ordinary household current). The ALCI
safety device in this unit is built into the plug. This device will make
it inoperable under some abnormal conditions, such as accidental
immersion in water. If the appliance is immersed in water, do not
attempt to reset the ALCI safety device.
The ALCI safety device is equipped with a test button so that its
operation can be checked.
TO TEST
1. Press the Reset button on the ALCI safety device.
2. Plug your blow-dryer into an AC outlet then press the Test button.
3. The Reset button will pop out. This verifies the safety device is
operating properly. If the Reset button does not pop out, do not
use the unit. Return it immediately for service.
4. Press the Reset button to reactivate the ALCI safety device. Your
blow-dryer is ready for use. Repeat this procedure every time
you use the blow-dryer to confirm that the safety device is
operating properly.
SPECIAL ATTENTION
If the unit detects an electrical shock hazard, it will immediately shut
off. To restore power, press the Reset button on the ALCI safety
device to reactivate the circuit.
Test the ALCI plug before each use as noted:
1. Press Test button.
2. Reset button will pop up. If it doesn’t, do not use appliance.
3. Press Reset button to test for power.
If the ALCI plug is damaged, it must be replaced by the manufacturer
or its service agent in order to avoid a hazard.
