12
Points of Daily Lubrication For
Your Model PR12:
The Following Parts should be lubricated to ensure proper machine maintenance
- Pressure Foot should be lifted up
and oiled. Hold the Ball Knob
and lift up. Place a few drops of
oil on the Pressure Foot shaft.
Always Unplug Machine and use Food Approved Oil and Grease!
- Knock Out Shaft should be oiled
when the Knock Out Arm is in the
up position. The picture shown
displays the Arm in the up position.
- Tower Stem should be oiled when
the Feed Tray is removed as
shown.
- Rod End Bearings should be
oiled with a few drops of oil.
There are two Rod End Bearings to
be oiled. Do not allow oil to drip
onto the Paper Feed Roller.
- Main Shaft should be oiled when
the machine is disassembled as
shown in this picture. Be sure to
oil under the collar by the machine
cabinet.
- The Grease Fitting in Main Shaft
Block and the Connecting Arm of
the machine should be greased
once every two weeks. 1 shot of
grease is recommended.
Pressure
Foot Shaft
Rod End
Bearings
Main Shaft
Ball Knob
Grease Fitting
Knock Out Shaft
Knock Out Arm
Tower Stem
