3
Installing Rear Machine Guard
Loosen the two bolts, one on the
Hopper and one on the rear of the
machine. Place Rear Machine
Guard under the washers located
under the bolt heads. Tighten bolts
using the provided Speed Driver.
To activate the interlock, slide push
rod into the plunger, inside the
keylatch, and turn rod to the right.
This will lock the push rod in place
and activate the interlock.
Installing the Feed Tray
Place stainless steel tube of Feed
Tray over the Hopper. Make sure
the Plunger on the bottom of Feed
Tray depresses the Tower Stem
inside the Tower Sleeve.
Installing Machine onto Riser
Platform
Place machine on the riser platform
making sure the 4 legs of the
machine go into the 4 leg wells on
the Riser Platform. The Picture
shown shows the front view of the
Riser Platform.
Thank you and congratulations on the purchase of your new Model PR12 Patty Molding Machine from
Patty-O-Matic, Inc! The Model PR12 will form, interleave paper between, and stack patties. This machine is
designed for easy operation and cleaning. Please become familiar with this manual and your machine will
give you many years of productive service.
The Model PR12 is shipped to you in at least two cartons which contain the patty machine, feed tray
complete with mold plate guard, rear machine guard, spare parts box, riser platform, and this manual. If you
purchased your machine with any other accessories, such as a mobile table or patty paper, these items may be
in a separate carton.
Your machine is equipped with two interlocks. One is located on the top of the machine and one is
located on the back of the machine. The Rear Machine Guard must be installed properly to engage the
interlock on the back of the machine and the Feed Tray must be installed on top of the Hopper to engage the
interlock on top of the machine.
For Additional Information or to view our Operational
or call
732-938-2757
Feed Tray
Feed Tray
Guard
Push Rod &
Round Keylatch
Guard Bolts
Interlock Tower
Rear Machine
Guard
Leg Wells
Plunger located
behind guard
