Installing the SmartNode extender
25
SmartNode 2290 Series User Manual
3 • Hardware installation
Installing an interface cable on the extender’s voice ports
The SmartNode extender comes with at least two voice ports (see
figure 6
) located on the back of the extender.
The voice ports are connected to analog devices via cables (see
figure 7
) terminated with RJ-11 connectors (see
figure 9
and
table 5
on page 26 for pin-out information).
Figure 6. Rear view showing location of Ethernet connectors and voice ports (SmartNode 2294 shown)
Figure 7. Analog connection
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0
Ethernet connectors
Voice ports
, 1.25A
Reset
Ports
ET
H 0/1
ET
H 0
/0
RJ-11, male
RJ-11, male
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0
