Status LEDs
36
SmartNode 2290 Series User Manual
5 • LEDs status and monitoring
Status LEDs
This chapter describes SmartNode VoIP extender front panel LEDs.
Figure 16
shows SmartNode 2292 and
2294 Series LEDs. LED definitions are listed in
table 8
on page 36.
Figure 16. Examples of SmartNode 2292 and 2294 Series front panels
Table 8. SmartNode LED Indications
LED
Description
Note
If an error occurs, all LEDs will flash once per second.
Power
When lit, indicates power is applied. Off indicates no power applied.
Run
When lit, indicates normal operation. Flashes once per second during boot (startup).
VoIP Link
When lit, indicates the gateway is registered on a gatekeeper, media gateway con-
troller, associated to a remote unit, or has an active VoIP connection. Off indicates the
unit is not configured or registered and has no active VoIP connection. Flashing green
indicates that the unit is attempting or has failed to associate/register
Voice port
Solid when leased line channel is operational. Should not be off or blinking.
Ethernet
(each port) •
Link
: Lit when Ethernet link is up.
•
100M
: On when 100-Mbps Ethernet is selected.
•
Activity
: Flashes when data is received or transmitted from the unit to the LAN.
Console
port
Power
VoIP Link
Enet 0
Link
Run
Enet 0
Activity
Enet 0
100M
Enet 1
Link
Enet 1
100M
Enet 1
Activity
Voice
Port 0/0
Voice
Port 0/1
Voice
Port 0/2
Voice
Port 0/3
Link 100M Activity
0/0
0/1
0/2
0/3
Power
Console
Leased-Line Extender Over IP
SmartNode 2294
Run
Vo
IP
Link
Link 100M Activity
L
in
k 1
0
0
M
A
c
ti
v
it
y
0
/0
0
/1
0
/2
0
/3
Enet 0
Po
rts
P
o
w
e
r
Console
Leased-Lin
e Extender Over IP
SmartNode 2294
R
u
n
V
o
IP
L
in
k
L
in
k 1
0
0
M
A
c
tiv
it
y
Enet 1
