Configuring the security interfaces
71
Models 2603, 2621, & 2635 High Speed Routers User Guide
5 • Security
The next step in configuring the router is adding the default gateway route. Since the WAN IP address of the
IPLink router modem at the CO site is 192.168.101.2, this will be the gateway for the IPLink router modem
at the CPE site, the modem we are currently configuring.
1. Click on
IP Routes
under Configuration on the IPLink router modem’s Menu.
2. Click on
Create a New IP Route
.
3. Enter 192.168.101.2 in the box adjacent to Gateway.
4. Leave Destination and Netmask both as 0.0.0.0 because this is the gateway default route.
5. Click on
Create
and the route will be entered.
6. The default gateway can be verified by clicking on
IP Routes
under Status in the menu.
Configuring the security interfaces
The interfaces and routes have been configured on the IPLink Router which will function as the firewall. The
Ethernet side of the IPLink router will be configured to be an internal security interface whereas the WAN side
is configured as an external security interface since it is on “public” side of the modem connection.
1. Click on
Security
under Configuration on the IPLink router modem’s menu.
2. Under Security Interfaces, click on
Add Interface
.
3. Select Name of the WAN port (PPPoH) and Interface Type to be external. Click on
Apply
.
Summary of Contents for IPLink 2603 Series
