WAN Service Configuration
51
Models 2603, 2621, & 2635 High Speed Routers User Guide
4 • Configuring the IPLink Router
•
Interface: 1
•
WAN IP address: 192.168.164.2
•
LLC Header Mode: off
•
HDLC Header Mode: ON
•
No authentication
•
Username: [blank]
•
Password: [blank]
1. Click on Configure.
2. Go to Configuration Menu > Configuration > WAN connections > Edit (for PPPoH Routed service) > Edit ‘IP
Interface’ > Ipaddr: [enter the WAN IP Address, in this example = 192.168.164.2]
3. Click on
Change
.
4. Configuration Menu > Configuration > IP Routes > Create new Ip V4 Route. Create the gateway to the
remote router by entering the WAN IP address of the remote router, in this example, enter 192.168.164.3
in the Gateway field
Summary of Contents for IPLink 2603 Series
