![background image](http://html2.mh-extra.com/html/patton-electronics/smartnode-4830-series/smartnode-4830-series_getting-started-manual_4099493077.webp)
Introduction
77
SmartNode 4830 Getting Started Guide
D • Port pin-outs
Introduction
This section provides pin-out information for the ports of the SmartNode.
Console port
Configuration settings:
9600 bps, 8 bits, no parity, 1 stop bit, no flow control
Figure 33. EIA-561 (RJ-45 8-pin) port
Note
N/C means no internal electrical connection.
Ethernet 10Base-T and 100Base-T port
Note
Pins not listed are not used.
Table 15. RJ-45 socket
Pin
Signal
1
TX+
2
TX-
3
RX+
6
RX-
1 2 3 4 5 6 7 8
8–RTS (N/C)
7–CTS (N/C)
6–TD
5–RD
4–SG
3–DTR
2–CD (N/C)
1–DSR
Pins 1 & 3 are
connected together
Summary of Contents for SmartNode 4830 Series
Page 52: ...52 Chapter 5 LEDs status and monitoring Chapter contents Status LEDs 53...
Page 81: ...81 Appendix E SmartNode 4830 Series factory configuration Chapter contents Introduction 82...
Page 83: ...83 Appendix F Installation checklist Chapter contents Introduction 84...
Page 85: ...85 Appendix G Accessories Chapter contents Introduction 86...