![background image](http://html2.mh-extra.com/html/patton-electronics/smartnode-4830-series/smartnode-4830-series_getting-started-manual_4099493071.webp)
Introduction
71
SmartNode 4830 Getting Started Guide
C • Cabling
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.
Serial console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in
figure 28
.
Figure 28. Connecting a serial terminal
Note
See section
“Console port”
on page 77 for console port pin-outs.
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode 4000 Series device
Console
VoIP
Gateway Router
ToIP
Integrated
Access Device
SmartNode 4524
Link
100M
Activity
0/0
0/1
0/2
0/3
Enet 0
Voice P
ort
s
Power
Run
V
oIP
Link
Link
100M
Activity
Enet 1
Summary of Contents for SmartNode 4830 Series
Page 52: ...52 Chapter 5 LEDs status and monitoring Chapter contents Status LEDs 53...
Page 81: ...81 Appendix E SmartNode 4830 Series factory configuration Chapter contents Introduction 82...
Page 83: ...83 Appendix F Installation checklist Chapter contents Introduction 84...
Page 85: ...85 Appendix G Accessories Chapter contents Introduction 86...