![background image](http://html2.mh-extra.com/html/patton-electronics/smartnode-4830-series/smartnode-4830-series_getting-started-manual_4099493074.webp)
Analog FXO
74
SmartNode 4830 Getting Started Guide
C • Cabling
Analog FXO
Applicable to SmartNodes equipped with FXO ports. The FXO ports are connected to analog phone lines via
cables terminated with RJ-11 connectors (see section
“FXO port”
on page 79 for details on port pinouts).
Note
The phone line socket (connector type and pinout) available from the public
network vary from country to country. Refer to technical information avail-
able from your local operator for additional cabling information.
Figure 31. Connecting to an FXO line socket
RJ-11, male
RJ-11, male
PSTN
wall plate
Ring (-) 3
Tip (+) 4
3 Ring (-)
4 Tip (+)
Summary of Contents for SmartNode 4830 Series
Page 52: ...52 Chapter 5 LEDs status and monitoring Chapter contents Status LEDs 53...
Page 81: ...81 Appendix E SmartNode 4830 Series factory configuration Chapter contents Introduction 82...
Page 83: ...83 Appendix F Installation checklist Chapter contents Introduction 84...
Page 85: ...85 Appendix G Accessories Chapter contents Introduction 86...