DSLAM Connections with remote CPE units
92
Model 3086FR ATM IAD User Guide
8 • 3086FR routed and bridged ATM connections
3.
Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route > Create the gate-
way to the remote 3086FR by entering the WAN IP address of the remote 3086FR, in this example, enter
192.168.164.3 in the Gateway field > OK
The other fields should be:
– Destination:0.0.0.0
– Gateway:192.168.164.3
– Mask:0.0.0.0
– Cost:1
– Interface:[blank]
4.
Go to G.SHDSL in the Configuration Menu, then the submenu Status. The Modem State should be
“deactivated.” (If not, go to the Action and change it to deactivate.)
Then in the Action submenu under G.SHDSL, change Action to
Start
, then click on
Action
.
Model 3086FR (Central) Configuration Steps (RFC 1483 Routed)
From the command line interface (CLI) via the RS-232 control port,
fi
ip list interfaces
fi
pppoh clear transports
Summary of Contents for ipRocketLink 3086FR
