T1/E1 Diagnostics
141
Model 3086FR ATM IAD User Guide
13 • Diagnostics
To set the 3086FR T1/E1 port in Network Loopback test, do the following:
1.
Go to the 3086FR Main page, select
E1/T1
. Next, click on
Test Modes
, select
network Loop
using the drop
down menu, click on the
Activate Test Mode
button.
2.
Perform a BER (bit error rate) test. Replace the Local T1/E1 equipment (PBX) with a T1/E1 tester, and
initiate a BER test to verify integrity of the cable and operation of the 3086FR’s T1 interface.
T1/E1 Local Loop
When set to local loop, the 3086FR/K loops DSL timeslots assigned to carry T1/E1 data to far end 3086FR or
3096RC T-DACS.
Figure 32. 3086FR/K T1/E1 local loop
To set the 3086FR in T1/E1 local loop test, follow these steps:
Summary of Contents for ipRocketLink 3086FR
